DRAFT


156cm
DRAFT | F.T.C. Price: 108,000YEN + TAX

YAQUI FACTORY

F.T.C
1920シーズンより改良した金型はノーズの3Dの深さを約2/3に、そして3D区間を58mm短く、テイルの3Dの深さを約1/2に、そして3D区間を98mm短く。これらの変更によってボトムのフラット区間を延長。従来の3Dを活かした浮力とファジーさを残しつつ、ターン後半までしっかりとホールドするカービングまでをも堪能できる板へと変貌を遂げ、よりハイスピードに、縦へ横へと突っ込んでいける板に。WOODCOREは軽量X-WOODとPOPLARのミックスコアに、ウエスト周辺部分のウッドコアベース側にDOT HOLEを多数削り、そこにフォームを入れるという非常に手間のかかるウッドコアPUNCHING DOT HOLE WOODCOREを採用、フォームをウエスト周辺にX状に入れることでノーズとテイルの張りを保ちながらウエスト周辺に集中的にトーションの緩さとフレキシブルさを持たせ、足裏感覚がダイレクトにボード捌きに繋がりカービングからトリッキーな動きまで自由自在なDRAFT。フレックスは柔らかいが、ワイドモデル独特のハイスピード時の安定感も備わっている。

F.T.C
The mold, which has been improved since the 1920 season, has a 3D depth of the nose about 2/3, a 3D section shorter by 58mm, a tail 3D depth of about 1/2, and a 3D section shorter by 98mm, so these changes extend the flat section of the bottom. While retaining the buoyancy and fuzzyness that makes use of conventional 3D, it has been transformed into a board that can be enjoyed even carving that holds firmly until the latter half of the turn, making it a board that can be thrust vertically and horizontally at higher speed. Woodcore is a mixed core of lightweight X-Wood and Poplar. Shave a lot of Dot Hole on the wood core base side around the waist, adopted the Punching Dot Hole Woodcore, which is a very time-consuming wood core to put foam in there. By putting the foam in an X shape around the waist, the looseness and flexibility of the torsion is concentrated around the waist while maintaining the tension of the nose and tail, and the feeling of the sole of the foot is directly connected to the board handling. DRAFT that allows you to move freely from carving to tricky movements. The flex is soft, but it also has a sense of stability at high speeds, which is a unique feature of this wide model.

DRAFTF.T.C.
F.T.C. 156cm
DRAFTF.T.C.
DRAFTF.T.C.
DRAFTF.T.C.



Spec chart

eff edge co length nose width waist width tail width nose height tail height radius(mr) waist setback stance setback stance range core sidewall base glass nose bottom mid bottom tail bottom structure
F.T.C. 156cm 1060 910(flat860) 315 262 295 75 50 6.2 85 50 500-580 Flex & Torsion Control punching dot core I (X-wood + Poplar + Form) ABS P-tex 4000 graphite triaxial 3 dimensions flat convex light 3 dimensions no







156cm
DRAFT | P.A.C. Price: 108,000YEN + TAX

YAQUI FACTORY

P.A.C
従来のFTC-PD core1の加え21/22モデルでは太田宜孝のリクエストにより、彼がメイン機としているCRUISERで使用しているP.A.C mixcoreをDRAFTに採用した高レスポンスモデルDTAFT P.A.C.が新たにラインナップに加わった。元々、テイルの3Dによる抜けを防ぐためにフレキシブルに改良されていった従来モデルだったが、一昨年前の金型変更によりグリップ力が増した現行モデルではテイル抜けが改良されたため、ハイスピードに耐えるよりタフで高レスポンスなP.A.C.モデルを用意、アーチ状に伸びた足元のカーボンがターンの侵入から抜けまでしっかりとしたホールド感を維持し反応の良いリズムを生み出す。

P.A.C
In addition to the conventional FTC-PD core1, the 21/22 model included the request of Yoshitaka Ota into the process. The "DTAFT P.A.C." which can be said to be a high response model that adopted the P.A.C mixcore used in his main CRUISER for DRAFT, has been newly added to the lineup. Originally, the DRAFT was a conventional model that was flexibly improved to prevent the tail from coming off due to 3D, but the tail removal has been improved in the current model, which has increased grip due to the mold change two years ago. Thats why we have prepared a P.A.C. model that is tougher and more responsive than it can withstand high speeds. The arched carbon at the feet maintains a firm hold from the intrusion to the exit of the turn, creating a responsive rhythm.

DRAFTP.A.C.
P.A.C. 156cm
DRAFTF.T.C.
DRAFTF.T.C.
DRAFTF.T.C.



Spec chart

eff edge co length nose width waist width tail width nose height tail height radius(mr) waist setback stance setback stance range core sidewall base glass nose bottom mid bottom tail bottom structure
P.A.C. 156cm 1060 910(flat860) 315 262 295 75 50 6.2 85 50 500-580 Power Arch Carbon mix core (X-wood + Poplar + Arch Bamboo + Vertical Arch Carbon) ABS P-tex 4000 graphite triaxial 3 dimensions flat convex light 3 dimensions no





T.J BRAND 2021-2022 Model